Grades: Gr5 (Ti-6Al-4V), strength as high as 895MPA, hard metal
Standards: ASTM B348, ASTM F67
Wall thickness: 5-200mm
Length: within 1 meter
Commercial condition: annealed
With advantages of light weight, high strength and excellent mechanical properties, titanium tube is widely used in heat exchange equipment, such as heat exchanger coil, heat exchanger, serpentine tubular heat exchanger, condenser, evaporator, electroplating line and transportation piping, etc. Titanium tubes are used as working units in nuclear power industry.
The corrosion characteristics of titanium alloy Ti-6Al-4V in three different environments, which simulates chemical, marine and industrial environments at various temperatures. The results revealed that the titanium alloy could form a protective oxide scale under different environmental conditions studied at both low and higher temperatures. The corrosion rate evaluated in different environments and at different temperatures was correlated. The pitting corrosion studies in different environments revealed that the alloy is resistant to pitting and crevice corrosion in marine and chemical environments at both temperatures but susceptible in industrial environments. The corrosion morphologies observed at different temperatures and in various environments were correlated as well as the degradation mechanism that is leading the titanium alloy to fail under various environmental conditions. Finally, based on the results obtained with different techniques, the alloy was recommended to fabricate the components intended to use in a variety of environmental conditions.
Typical application is for Oil drilling platform
All products will be manufactured strictly according to ISO9001:2008 Quality Management system. Mill Test will be provided, we could also provide Test Report released by Third Party(Northwest Non-ferrous Metal Institute or other you appointed)